BLOGas.lt
Sukurk savo BLOGą Kitas atsitiktinis BLOGas

Archyvas: Spalis, 2018

What are the characteristics of the grinding machine processing barite?

2018-10-29

In recent years, with the rapid development of the grinding milling machine market, the development of the barite market will become better and better. The development of the barite market needs to be completed with the help of professional milling equipment. The HGM milling production line produced by SBM has been broken. The drawbacks of the traditional mill in the production process, through continuous improvement and upgrade of the equipment, the energy consumption in production is reduced, the output will not change, is an efficient milling production equipment, in barite The mineral powder market is highly favored, and SBM’s mills are also flexible in configuration.
HGM mill adopts multiple grinding rollers to arrange and combine, and forms a series of products with a small number of standard modular components. It can meet different product fineness. After the grinding, the raw stone powder has been used in industry, construction, agriculture, etc. Widely used in many industries, SBM processing Calcite mill Introduction, stable operation, high output and low output have exceeded expectations.
As people meet the new requirements of the state, barite powder can be applied to the coatings industry, so that the paint can meet the requirements of national standards at a lower cost. Barite powder of different fineness is used in building materials, flue gas desulfurization, sewage Processing and other industries and industrial fields have different applications, especially deep processing products such as barite in recent years, the development in the country is faster and faster, and the development prospects are better.
At present, most of the barite is finished by a mill. According to the characteristics of the product, the barite powder can be deeply processed. The SBMHGM mill is used in the deep processing of stone powder, and has achieved good results. When the rotary kiln powder is produced, the content of the finished CaO is effectively improved while grinding. The milling equipment is simple in operation, convenient in maintenance, greatly improved in production efficiency, excellent in product performance, and the output is also continuously improved.

Rodyk draugams

Introduction to machine sand equipment knowledge

2018-10-26

With the pull of domestic demand, the investment in infrastructure such as roads and railways is increasing, and a large amount of sandstone is urgently needed. In order to protect the ecological balance, the state expressly prohibits the excavation of natural sand (except for clearing river courses). The supply of natural sand can hardly keep up with demand. Therefore, the development of the mechanism sand is very urgent to mention the agenda. In view of the fact that the mechanical sand is rock blasting, mechanical sand or river pebbles are sanded and sieved by sand making machine, and its strength and other properties are superior to natural sand. Mechanical sand is superior to natural sand in both physical and chemical properties. We must stand at the strategic height, establish and implement the scientific development concept, enhance the sense of responsibility of human environmental protection, vigorously develop and actively promote the mechanism sand equipment. Although China’s research and development of mechanical sand technology and equipment started late, the development is slow. Some large-scale water conservancy projects use artificial sand. Many of the key sand making machines are imported from abroad. There is still a certain gap between the development of domestic mechanical sand equipment and the advanced level of foreign countries. However, we believe that after a period of hard work, it is able to catch up with or surpass foreign similar equipment. Nowadays, it is still good to use some mechanical sand equipment in China. It is worthwhile to choose sand making materials as appropriate. The requirements of sand and gravel industry are different from those of mine grinding industry. At present, most of the companies that produce sand-making equipment are responsible for the mining machinery manufacturing industry. Therefore, we must first understand the requirements of sand and gravel. 1. The granule requirements of the mining equipment for sand making materials are fine. In general, the needle-like material enters the mill and is more susceptible to grinding. The requirements for gravel are contrary to the above, and the requirements for grain size and grain size are very strict. The reason is that the cubic sand has a function of locking each other due to its angular shape. The continuous grading of the sand can greatly reduce the gap. At the same time, the cubic sand occupies a larger surface area than the round sand, which makes the asphalt and materials or cement and materials stick together to reduce the possibility of displacement. 2 According to the definition of the mechanism sand: rock particles with a particle size of less than 4.75 mm made by mechanical Sand making machine and sieving after soil removal treatment. But does not contain soft rock, weathering rock particles. 3 sand specifications: sand specifications are divided into coarse, medium and fine according to the fineness modulus (Mx). Among them: the fineness modulus of coarse sand is 3.7~3.1, the fineness modulus of sand is 3.3~3.0, the fineness modulus of fine sand is 2.2~1.64, and the grade of sand is divided into: I, II, III according to its technical requirements. Three levels. Uses: Class I sand is suitable for concrete with strength grade greater than C6. Class II is applicable to concrete, hydraulic concrete with strength grades C30~C60 and antifreeze, impermeability or other requirements. Class III sand is suitable for concrete and construction mortars with a strength class less than C30. Characteristics: The particle size of sand is between 4.75~0.15mm, and the stone powder less than 0.075mm should have certain limits. The particle size is 4.75, 2.36, 1.18, 0.60, 0.30, 0.15, preferably continuous, and each A certain grade should have a certain percentage, and its granular shape is preferably a cube, and its needle-like content is also required. There are many mining equipments suitable for the production of sand. However, for the moment, there are mainly the following seven types: 1. Vertical impact sand making machine; 2. Counterattack fine sand making machine; 3. Jaw crusher; 4. Roller sand making machine 5. Cone sand making machine; 6. Rod mill. These sand making equipment have different characteristics and each has different uses.

Rodyk draugams

Jaw crusher becomes an important crushing device for coarse crushing

2018-10-24

The jaw crusher has always been an important crushing device for the coarse crushing process in the stone production line and the sand production line. Since the feed port of the jaw crusher is large, it is a primary crush in the crushing production line, which shows his importance. The traditional PE series jaw crusher is a toothed plate extrusion type of round-trip crushing, and the broken material can only meet the requirements of entering the impact crusher and fine crusher for crushing production. Therefore, he is usually in the stone production line. The highest point is broken.
As a new generation of high-performance crusher, jaw crusher surpasses traditional E-break in performance, maintenance cost and structure, and can be widely used in metal and non-metal mines, cement, construction, sandstone, metallurgy and other industries. PE series high-energy rupture is used in the production process of building gravel and machine-made sand, especially when crushing hard materials such as basalt, it has higher production efficiency and lower running cost than traditional smashing.
According to the principle of the PE series jaw crusher, a buffer spring is added to the back, so that it can play the role of buffering the pressure during the production, which further increases the particle size and the degree of extrusion, if it is in production. When the discharge is too large, only the adjustment of the bolts behind will strengthen the discharge particle size of the entire stone production line to alleviate the pressure of the secondary crushing to achieve the overall production efficiency improvement, and the discharge granularity is uniform.

Rodyk draugams

Highlights of the artificial sandstone production line of the counter-type sand making machine

2018-10-23

With the launch of the country’s large-scale high-speed rail program, the demand for aggregates of sand and gravel has also increased greatly. The production of high-quality sand and gravel requires high-performance Sand making machine. In this case, the crusher becomes one of the indispensable mechanical equipment in the construction of railways, high-speed rail, subways and tunnels. The gravel production line is mainly used to produce different specifications of sand and stone materials to meet the demand of sandstone for infrastructure construction. The main equipment of the production line are: vibrating feeder, jaw crusher, impact crusher, hammer crusher, system. Sand machine, vibrating screen, belt conveyor and other equipment. Highlights of the artificial sandstone production line of the counter-type sand making machine, this series of equipment has unique structure, equipped with high-chrome plate hammer and unique counter-attack liner; suitable for hard rock crushing, high efficiency and energy saving; adjustable grain size can simplify crushing The process has the advantages of large crushing ratio, high crushing efficiency, cube shape and selective crushing. The machine is widely used in various ore crushing, railway, highway, energy, cement, chemical, construction and other industries. The size of the discharge material can be adjusted, the crushing specifications are diversified, and the addition of the production line has a multiplier effect. In addition, the line can choose different equipment configurations depending on the material. ZENITH Heavy Industry has rich experience in artificial sand production line configuration. It can provide customers with cost-effective production lines according to different production requirements of users, and strive to provide customers with small investment and large-capacity configuration solutions.
ZENITH works hard for professional crusher equipment and mineral processing equipment manufacturers. The main products are roller crusher, jaw crusher, impact crusher, impact crusher, hammer crusher, etc., to provide more efficient customers. High-quality crushing equipment products and sincere and perfect services have made greater contributions to the development of crusher equipment industry in China.

Rodyk draugams

Is the processing calcite using an ultra-fine grinding machine?

2018-10-22

Calcite A mineral containing high natural calcium carbonate, which is widely distributed throughout the world. The gloss of the glass is presented, the Mohs hardness is 3, and there are many mechanical equipments for processing calcite. Then, is the processing calcite using grinding milling machine? What are the advantages?
Feasibility analysis of calcined powder by ultra-fine grinding machine
The ultra-fine mill using the principle of intergranular lamination is used to grind calcite. In the crushing chamber, the phenomenon of “stone crushing” is presented, which replaces the traditional single-grain grinding principle, which not only realizes the selection of materials. Sexual processing, but also can significantly increase the product fines ratio and cube content, greatly reducing the needle-like material, at the same time, can also reduce the wearing of wearing parts
Secondly, in the modular design of the ultra-fine mill, Shanghai SBM can realize the conversion of coarse, medium and fine crushing by changing the cavity type. The processing granularity can be switched between 300 mesh and 3000 mesh, and the production can be improved. At the same time of benefit, it can also meet the large production demand of the customer’s other stone powder products, so in general, the use of limestone mill to process calcite is a natural fit.
The production process for processing calcite using ultra-fine mill is as follows:
Firstly, the raw material is broken into the jaw crusher by the vibrating feeder, and the crushed calcite stone is evenly conveyed by the belt conveyor to the ultrafine mill for the second crushing and grinding. The produced ore fine material is rounded. The sieve is sieved, and the larger stone is returned to the grinding chamber for processing again. This is called returning; other suitable stone materials are sent to the modification machine for modification. This step depends on the customer’s needs. If the quality of the stone is not high, you can omit this step and send it directly to the packaging collection.
Is the processing calcite using an ultra-fine grinding machine? The answer to this question is already obvious. Shanghai SBM is committed to research and development of equipment for processing and processing calcite for more than ten years. It has superb technology and perfect pre-sale, sale and after-sales service. You are welcome to call us.

Rodyk draugams

Analysis of the cone crusher in the stress

2018-10-19

The cone crusher is an important ore dressing equipment with relatively large body shape. During its operation, the wear of the parts will seriously affect the vibration stability of the crusher, and at the same time, the machine will be in a state of forced vibration for a long time, which will seriously affect the crusher. Safe to run. The study found that the disturbance is an important factor affecting the forced vibration of the crusher. Let us analyze it here.
According to the angular velocity vector diagram of the crusher cone crushers, due to the structural characteristics of the crusher cone support device, the crushing cone not only rotates with the eccentric hole of the eccentric bushing around the center line of the machine, but also rotates around its own axis, which is the crushing cone. This kind of movement is called regular movement. Since the center of mass of the crushing cone is not on the center line of its rotation, it is necessary to generate inertial force and moment of inertia during operation. This force acts on the frame as a periodic dynamic load that causes the vibration of the frame and the deflection of the eccentric bushing. When the crusher makes regular movements, it periodically reacts to the frame sleeve and the spherical bearing during no-load, which causes the harmful vibration of the frame machine and the eccentric bushing to be deflected and cannot work normally.
The counterweight of the large bevel gear of the slag crusher is to eliminate the inertial force and the moment of inertia of the direction change caused by the crushing cone. Due to the limitation of the size of the crusher, the inertial force of the crushing cone cannot be completely eliminated. Therefore, when the crushing cone rotates, a large unbalanced inertial force is generated. This unbalanced inertial force is caused by the crusher frame and the basic vibration. Disturbance. That is, the disturbance of the crusher is the unbalanced inertial force generated when the crusher’s crushing cone rotates around the central axis. Vibration analysis under disturbance. The vibration of the machine can be divided into two types: free vibration and forced vibration. The body and foundation of the crusher are constantly excited by the outside world, and there is always disturbance during the whole vibration process, so it is a typical forced vibration.

Rodyk draugams

Some considerations for mobile coal crushers

2018-10-18

1. Remove foreign matter from the mobile coal crusher and move the rotor by hand to check for friction or collision.
2. Check whether the installation position of each component of the equipment moves, metal crusher, deform and lock all bolts. *** Check if the seal is good.
3, the installation of the host should be balanced, the spindle horizontality error is less than 1mm / m, the main driven wheel in the same plane, but also to adjust the belt tightness, fixed motor. The main driven wheel is in the same plane
4. The mobile coal crusher rotor has been balanced before leaving the factory. The general user does not need to perform the balance test. When replacing the hammer head and rotor parts, the mobile jaw crusher should be balanced.
The mobile coal crusher is one of the best-selling crushing equipment in the crushing industry. Whether it is dry material or high-humidity material, it can be crushed, and it is also widely used in application. For example, cinder, slag, in-plane-mobile crushing construction waste, coal gangue, shale, etc. can be crushed, so it is very popular among users in today’s market, and it is the user who buys mobile coal crusher.

Rodyk draugams

Knowledge of milling equipment

2018-10-17

There are many types of mill equipment, and there are many manufacturers of mill equipment on the market, and the quality and price are all different. Today, the grinding mill has ultra-fine grinding machine, vertical mill, Raymond mill, micro-grinding, high-pressure grinding, coarse grinding, and some auxiliary equipment powder coating modification machine, hoist, Screw conveyors, gas conveyors, etc. In addition, some of them need to be crushed before grinding. At this time, hammer crusher, jaw crusher, impact crusher, etc. will be used. Milling equipment has developed particularly well in recent years, with the consequent increase in demand for milling equipment.
Milling equipment is suitable for building materials, chemicals, metallurgy, mining, refractory, ceramics, steel, thermal power, coal and other industries, and is widely used. Among them, the ultra-fine mill is very popular. The ultra-fine mill can grind a lot of hard materials, and the fineness can be very high. The used customers say that the ultra-fine mill can be between 325-3000. Adjust it arbitrarily. The materials that can be ground are: quartz, feldspar, calcite, gypsum, limestone, dolomite, graphite, fluorite, wollastonite, phosphate rock, talc, granite, potassium feldspar, marble, barite, etc. .
Nowadays more and more use of milling equipment, how to buy milling equipment has become a headache for many customers. Xiao Bian feels that he can first look for a few bentonite mill equipment manufacturers to look at it, and then choose a satisfactory understanding. In addition, when the manufacturer’s test conditions permit, it is necessary to turn on the power to test the machine when purchasing the mill. By observing the overall operation of the machine, you can also see if the operation of the grinding equipment is stable, whether the quality is qualified, and then decide whether to buy.
Shanghai SBM Machine Co., Ltd. is a manufacturer specializing in grinding machine equipment, crusher equipment and auxiliary equipment.

Rodyk draugams

Precautions for installation of impact sand making machine in sand production line

2018-10-16

In the installation process of the impact sand making machine, if it is not installed correctly, the whole production line will not work properly, it will also bring harm to the machine itself, and pose a personal threat to the sand making operators.
The sand making machine is a kind of gravel equipment mainly composed of a feeding hopper, a distributor, a vortex breaking chamber, an impeller, a main shaft, a base, a transmission device and a bracket. The impact sand making machine is a new type of sand making machine modified according to the principle of the sand making machine.
In various stone production lines and sand production lines, sand making machines are generally equipped with crushers for re-crushing. Therefore its installation has a lot to do with the crusher. The location of the impact sandblaster will vary depending on the location of the crushing site. It is usually installed in a factory building or in an open space.
Before installing the impact sand making machine, first check the packing list to check whether the various parts are worn or not during transportation. During the installation, the sand making machine should be leveled so that its main axis is perpendicular to the horizontal plane. Appropriate space should be left above and on both sides of the sand making machine for hoisting and maintenance. After the installation is completed, a full inspection should still be carried out, for example: whether the lubricating oil pipe is securely connected.
The impact sander must be re-added once before commissioning, and check whether the connection between the components is firm and reliable, whether there is any foreign matter on the impeller, and whether the motor wiring is correct. After the operation, if there is any abnormality, stop running immediately.

Rodyk draugams

Micro-grinding equipment, energy saving, greening

2018-10-15

In today’s era, most of them are green and environmentally friendly. In some places, the environmental pollution index is too high, and some backward manufacturers produce equipment that is relatively backward, so the pollution to the environment will be even more severe. Environmental pollution not only stops the work in our hands, but also affects our health. Shanghai SBM Machine Co., Ltd. is a manufacturer specializing in grinding equipment, and has also made many contributions to environmental protection. For example, in the elaborate production of grinding mill, a dust collector is arranged, which can effectively reduce dust pollution.
Today, micronized grinding is a popular milling equipment in a variety of industries and is used in many industries. The quality of micro-grinding is good, the output is large, the operation is stable, and it can also save energy and protect the environment. Because no matter in which industry, energy saving and emission reduction will be favored by customers. Energy-saving emission reduction and green environmental protection have become hot topics in various industries. Nowadays, various enterprises have launched new energy-saving and environmentally-friendly products, which means that all industries are developing towards energy conservation, emission reduction and environmental protection. It is not difficult to see that energy-saving emission reduction and green environmental protection have become the main cards.
SBM’s micro-grinding equipment has a dust collector to capture dust, and a muffler to reduce noise, which can save energy and reduce noise. If there is a need for micro-grinding, you can go to Shanghai SBM Machine Co., Ltd. to inspect and purchase. Xiaobian understands that the development of the cement industry sometimes uses micro-grinding. In the cement preparation process of cement plants, the micro-powder mill equipment plays a role. Great role. Therefore, the selection of grinding equipment is of vital importance to the survival and development of cement plants. SBM is a micro-grinding manufacturer with a good reputation in the mill market. The quality of the products is a large-scale professional mill manufacturer.
Shanghai SBM Machine Co., Ltd.’s micro-grinding equipment, ultra-fine grinding equipment, ultra-fine vertical grinding equipment, high-pressure grinding equipment, crushing equipment and auxiliary equipment are quite popular.

Rodyk draugams