BLOGas.lt
Sukurk savo BLOGą Kitas atsitiktinis BLOGas

Archyvas: Sausis, 2016

Introduction of glass clamp

2016-01-31

Selection sophisticated products, glass clamp based on form and function, the main color of the following materials, and the use of more advanced and higher requirements for surface treatment technology for processing of blanks:
1, stainless steel
      The main use of high quality stainless steel, the surface can be cast into a mirror, you can be plated or PVD titanium nitride and other vacuum plating See on the mirror, or pull the hair into a stainless steel wire lines, can also be colorful spray paint on its surface;
2, copper
      Polished direct use, the product itself has a unique antibacterial sterilization function, or surface coating layer of clear lacquer protected against oxidation. We also use a variety of surface copper plating, bright chrome, chrome sand, sand nickel, titanium, zirconium and gold;
3, aluminum
      We use high-purity aluminum, using anodized surface which we can use the effect after blasting, color sand silver or champagne gold, surface wear and corrosion resistance.
 4, various types of non-metallic
       Widespread adoption of non-metal, all kinds of high-grade wood, glass, stone and other surfaces for fine sanding and strongly the use of newer surface antibacterial material.
5, quality
      201,304 from stainless steel, aluminum, copper and other raw materials to production process monitoring layers, product quality strictly, allowing brightness, smoothness, improved stability, quality assurance.
Surface treatment
  Handle surface treatment Ye Hao variety of ways, according to handle different materials have different surface treatment, surface treatment of stainless steel with mirror polished, brushed surface, plating color; we can do different surface treatments according to customer requirements.

Rodyk draugams

A Few Notes on the Installation of Rod Mill

2016-01-30

1. The installation site of Cement clinker grinding process is closely related to the crushing machine as different crushing site requires different installation position of the rod mill. Generally speaking, Fly Ash Grinding Mill is installed in the workshop or in the open air.
2. Before installing rod mill, check it according to the container loading list and check whether there is damage on the spare parts during the transportation process and whether the spare parts and the replacement parts are complete.
3. Before the machine leaves the factory, the workers have run it for hours to make sure that every spare part can work normally. Even so, after it is installed in the working site, it is still necessary to completely check whether the lubricating pipes are firmly connected, and add oil again before the test run and special grade Mobil automobile oil should be used.
4. Make the spare parts are connected firmly and reliably. Check if there are foreign matters on the impeller, if there are, timely eliminated them. Check whether the connection of the motor is correct and whether the voltage is normal.
5. Before installing the belt, first start the motor, and the revolving direction should be the same with the marked direction of the White cement production line.

Rodyk draugams

Choosing Right Hammer Crusher Brand is Paramount

2016-01-29

At present, many leaders of the stone and Gold ore wet plant and small and medium cement factories often complain that the economic situation in recent years makes the cement and stone and sand industry not hot as before and the profit margins of this industry has been shrinking continuously. On the other hand, the hammer crusher which is one of the crushing equipment that is often used in the cement and stone and sand making process cannot make people feel relieved as well because the investment cost is extremely high and the operational and maintenance cost in the latter period is also very high. Then during the operational process of the hammer crusher, what problems will occur? And how can the customers chose the right hammer crusher brand?
Hammer mill with cyclone is mainly used for crushing medium-hard or brittle materials with hardness not more than 300Mpa and 15% moisture such as barite, limestone, terrazzo, silica sand stone, coal, coke, gypsum, aluminum sulfate, slag, salt, chalk, blocks, cement, alumen, brick, tile, etc. It has the features of simple structure, big crushing ratio, high production efficiency, uniform particle size, etc. The hammer crusher is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as Cone Crusher Spare Parts and other used in metallurgy, building material, chemical and water - power industry, with a feature of big crushing ratio and even product graininess.
The wear resistant part of the hammer crusher has a serious influence on the performance of the crusher equipment. The hammer of the crushing machine will produce severe impact and friction with high rotating speed during the crushing and breaking process, for this reason, the hammer may be wore and tore in a very short of time and will be discarded as useless which lead to the working efficiency of Balck powder magnetic separators decrease extremely and the energy and electricity consumption increase significantly which seriously influenced the overall use performance of the hammer crusher. This resulted great damage to the cement and stone and sand companies every year and at the same time, frequently changing the hammer also make the working conditions of the workers become worse and bring with it many unsafe production factors.
When the customers choose the hammer crusher brand, they should take the wear resisting property of the hammer and choose professional wear resistant part manufacturer. In this way, the professional company will ensure the excellent and long service life of the crushing equipment, and on the other hand, avoid the influences of the performance reduction of the hammer crusher resulted by the quality problem of the wear resistant part, and at the same time, greatly reduce the operational and maintenance cost and reduced the working pressure of the workers.
Our company has been adhering to the concept of ‘people-oriented, customer supremacy, development and innovation’. We are able to provide our customers not only the highest quality products like Basalt Gravel Grinding Plant at the most favorable price, but also the most reasonable suggestion of equipments, optimum process configuration, and a full range of technical support. In pursuit of bringing customers the most benefits with minimal investment, we have been trying our best to help customers in any case!

Rodyk draugams

Dust Collector–Dust Catcher

2016-01-28

Brief Introduction of Dust Collector
Dust collector or dust-precipitator is a high efficiency, energy saving, stable and reliable operation Brick crusher for sale which is developed by our company. It absorbs overseas advanced technology of bag type dust collector. It can be used in boiler, metallurgy, building materials, chemical, food and other industries, and it is one ofthe most extensive applications of dust removal device. Dust arresters play a major role in helping companies meet these requirements and improve both indoor and outdoor environments by capturing a high percentage of the particles emitted by industrial processes.
Applications of Dust Catcher
Dust collection is a vital process for coal handling, Barite Mineral Grinding Machine, metal fabrication, mining, chemical processing, woodworking, pharmaceutical, recycling and agricultural industries, among many others. The particles released during manufacturing processes are hazardous to both worker and equipment health, quickly leading to a number of problems if particles are not captured bydust collection equipmentand filtered from facility air.Dust collectionaddresses this problem by drawing contaminated air through a filter or separator, trapping harmful particles and releasing cleaner air into the atmosphere or back onto the work floor.
Powder Concentrator Main Features
Better performance
Movement of air from top to bottom aids in removing powder from bags eliminating the possibilities of dust re-entrainment. This results in low-pressure drop and precious energy saving. Anti-stick coat on bags facilitates removal of powder avoiding chocking of filter bags. Automatic air pulse jet system with adjustable stone crusher machine in india to clean filter bags on-line. Bottom cone angle of housing is 450 hence powder slides freely down.
Ease in maintenance and long life
Bag removal from top facilitates maintenance in dust free atmosphere. The bag cage has 16 wire rods for better support to bag that improve bag life. Aluminum de-cast heavy wall Asphalt Crusher For Sale ventures for distortion free and leak free performance. Heavy wall thickness renders long life.
Safe Instrumentation and Alarm
Fully automatic temperature controlled Cold Air Bleeding system is to limit air inlet temperature to protect the filter bag fabric. Differential pressure switch Crusher for gold mining is provided to know if bags are chocked. Vacuum pressure switch is provided to protect the housing and bags from collapsing under vacuum. Compressed air pressure switch is provided on pulse jet cleaning system to ensure sufficient pressure is available for proper cleaning of filter bags online.

Rodyk draugams

Analysis on Vibration Isolation System of Concrete Crusher

2016-01-27

Load acting on stone crusher price list is actually the inertia force and inertia moment generated by movable vertebrae and vibrator, which is a cyclical dynamic load, therefore, it is inevitable to cause crusher vibration. Vibration forms of Construction of gyratory crusher are vertical circular vibration, horizontal vibration, pendulum vibration, as well as extraneous vibration which is caused by intense shock and vibration, among which, horizontal circular vibration is principal oscillation, and other vibration forms are relatively small, so we here mainly talk about vibration isolation system of horizontal circular vibration.
Body of concrete crusher is located on the isolation system; if set shear elastic stiffness of vibration isolation system as K, total mass of material in concrete crushing machine as M, inertial force of concrete crusher in any horizontal direction as Fc, then the spring mass system of concrete crushing machine can be shown in the figure below.
If ignore damping, vibration of crushers in x direction can be calculated by:
The first part is self-vibration of inherent frequency Wn, AA is free Balck powder magnetic separators, A2 is initial phase of crushing motion. The second part is the forced vibration of inertial force w. As damping always exist in actual vibration system, so with time going on, free vibration part of the primary crusherwill decay. If Wn=w, the amplitude will be infinitely great, this phenomenon is known as resonance. When choosing vibration isolation system, inherent frequency Wn must be away from the inertia force frequency w, to avoid resonance. As shear elastic stiffness of rubber spring is smaller and affordable to multi-direction loads with large damp, it has good effect on absorbing shock and high frequency vibration and reducing noise, therefore, it is ideal to adopt rubber spring as vibration element of Stone crusher machine design.

Rodyk draugams

Classifications and Characteristics of Rough Cone Crusher

2016-01-26

The cone crusher made in China can be divided into three common types: the rough crushing machine, the medium crushing one and the fine Crusher Plant For Sale. The rough cone crusher is also called gyratory breaker and the medium or fine crushing machine is also named mushroom shaped cone crusher. The gyratory breaker always does rough crushing to materials with all kinds of hardness in the ore beneficiation industry and other industrial departments.
In China, most ore beneficiation plants will apply Mini crusher for sale to work with other machines for the medium processing procedure. Most fine crushing machines will adopt the short head cone crushers. Sometimes, we will choose the proper breaker between the gyratory breaker and the jaw crusher. Here we will learn about the knowledge of selecting and applying the suitable crusher.
Compared with the jaw crusher, the rough iron ore crusher machine has the following advantages:
1. It can provide enough feeding materials. The gyratory breaker can be directly fed with raw materials without the help of ore storage bin and rock feeder. While the jaw crusher can succeed in this process and we often need to add extra devices to assist the crusher to finish the whole crushing process.
2. The gyratory breaker can work in a very stable condition with little vibration. The machine is quite lighter than the jaw crusher. Moreover, the crushing cavity of the used stone crusher for sale is larger than the jaw crusher and it can work continuously and high efficiently, which makes users realize high yield as they expect.

Rodyk draugams

Ball Mill and Machine Crusher Contribute to Economic Development

2016-01-25

Energy conservation is the primary task of China in recent years. In order to cater to the market demand and energy-saving requirements, grinding ball mill industry keeps pace with industrial development and promotes the structural adjustment of China’s economy. Energy saving, consumption reduction and environmental protection have become China’s basic state policy and long-term strategic development policy for sustainable development in the future. Hence, energy saving and emission reduction are the inevitable development trends of China ball mill. Energy-saving grinding ball mill, Stone crusher machine design, ore beneficiation equipment and other mining products have already become booster of China’s economic development.
With the fast forward of the comprehensive utilization technologies of mineral resources and related industries, the total sum of excavation of mineral ores has exceeded 5 billion tons. The ball crushing device has been widely used in resource exploitation and mine construction. Improving technical content, optimizing product quality, accelerating pace of energy saving and emission reduction and promoting efficiency of mining exploitation are the most important tasks of ball mill at present.
The successful launch of energy-saving Ball mill for ceramics makes the pulverizing grinder mill gain larger development pace in mining machinery field. High adaptability, flexible collocation, low consumption and high productivity are the distinctive features of ball mills. The ball mill bearings are adopted rolling bearings to replace traditional sliding bearings, which is easy to start and save power consumption of 20% to 25%. There are many factors influencing ball mill production capacity, such as material nature, particle size of materials to be ground, required product fineness and so on. Generally speaking, there are three direct methods which can improve ball mill production capacity, they are:
1.Add a tertiary crusher in front of the grinding mill
2.Improve grinding system and increase grinding efficiency
3.Add a highly efficient powder concentrator

Rodyk draugams

Analyzing the Causes for Cone Crusher Processing Capacity Reduction

2016-01-23

For sandstone plants, the most important virtue for crusher is high productivity. The reduction on processing capacity is a very serious matter for Asphalt Crusher For Sale. Today ZENITH Machinery will analyze the causes for processing capacity reduction.
If stockpile occurs on cone crusher, it will cause processing capacity lower down. If you want to understand the causes for cone crusher stocking materials, you must first make clear the conditions for Basalt Gravel Crushing Plant stable running.
When cone crusher operating, the axis of the crushing cone does conical surface motion referring to the centerline of cone crusher body, with the cone top as the spherical bearing center. The central point keeps static in the process of crushing cone motion. Besides, when the cone crusher is in operation, the main axis of crushing cone must intersect with the centerline of the cone crusher body in the center of the sphere. Otherwise, it will disturb the normal work of the crusher. Accordingly, during the motion of the cone, the focus where the dynamic cone axis intersects the center line of the frame must be overlap the Gold ore wet plant, which is a prerequisite for normal operation of the dynamic cone.
In addition, in order to ensure the dynamic cone not to overturn, in maintenance, we must make two-thirds of the whole spherical bearing contact area on the outer ring, with the left on the inner ring not in contact. After running a period of time, it can achieve the whole area contacting uniformly.
If the eccentric axis position is not correct or offsets when manufacturing the eccentric shaft sleeve, we can increase or decrease the gaskets between the bowl tile and the bowl tile support to adjust relative position of the bowl tile and the eccentric shaft sleeve. If the the eccentric axis is significantly different or , the eccentric angle is not correct, only to change the eccentric axis angle and replace a new shaft sleeve with correct axis position.
If there is something wrong with the China stone crusher manufacturers, first to check the fixed cone and the dynamic cone to find out the root, next to replace spare parts.

Rodyk draugams

China impact crusher could look for other ways out of the woods in the overheated economic situation

2016-01-22

Through the rapid development of 2010-2011,Chrome ore lumpy crusher at last has been stroke by the spread of European economic downturn crisis, in 2012 the sales situation is not optimistic. Whether Impact Crusher For Gravel of China could look for other ways out of the sales plight, let’s wait to see in the coming 2012.
Overheated Economy refers that the speed of development of the market supply and market demand, are out of proportion. The increased supply of capital, because of the false demand, is essential reason of the market economy overheating. Capital growth rate is faster than the amount of the actual market cycle, in a certain cycle stages, causing the paradox phenomena of the the market shortage of resources and a certain excess of resources at the same time. Within a period, it always shows high-rapid economic development and the high price index. According to the definition of economics, the actual growth rate exceeds the potential growth rate called the economy from overheating, and its basic features of the economic elements of aggregate demand to exceed the total supply, which led that the comprehensive price index continues to rise. Economic overheating staged in the Chinese classical style in the early 1990s.
Overheated economy can be divided into consumer-driven overheated economy and investment-driven overheated economic. The overheated economy due to strong consumption of people is called consumer-driven economic overheating; investment-driven economic overheating, that is excessive investment , which contains two aspects of meaning:
First, after the completion of the investment projects, the products are not expected in the market demand, so product accumulated, the funds could not be recovered, resulting in a serious waste of the means of Complete stone crushing plant. At this level, the over refers to the excessive demand for investment relative to the market.
Second, the spreading scale of investment is too extending, so that exceeding the capability of financial burden, and the investment can not be completed according to schedule, resulting that it could not form the expected production capacity. This level of over is the scale of investment relative to the excessive financial burden.
At present, sales situation of impact crusher in China is fairly fine, although economic downturn in European has brought certain negative effects on us, there is an upside. Economic downturn, European countries will come up with large sums of money to stimulate investment, there must also be conducive to China’s Crusher size reduction ratio.

Rodyk draugams

Cement production procedure

2016-01-21

The layout of the cement production line is set up Ball mill for ceramics in mining area, and builds cement grinding station near the cement sales market in the big and middle city. Most of the cement admixture is the city industrial waste generated. Cement grinding station can greatly absorb the slag, fly ash, cinder, coal gangue and other industrial waste, which is a green industry. The cement station provided by our country adopts the simplest process flow, with the advantages of easy to operation, at least process equipment, low investment, energy-saving and environmental protection; what more it can be mixed with more materials.
Cement production process: materials?drying Barite Ore Grinding Plant ?cement
In the cement production process, drying and milling are the two most important steps.
The main machinery in the drying step is dryer, here we do not focus on the dryer, if you want to know more about the dryer, please click here: China dryers.
Here we mainly explain the milling step. In this step the main machinery we used is cement ball mill which is also called ball mill for short. Calcite powder grinding mill is mainly applied to mill the finished products and raw materials of cement factory; it is also widely used for grinding ores and grind-able materials in metallurgy, chemical industry, electric power and other industrial and mining enterprises. It is not only suitable for open flow grinding, but also close-circuit grinding after combine with separator. The cement mill has the characteristics: strong adaptability, continuous production, high compression ratio, and easy to adjust the grinding fineness. It can be not only used for dry production and wet production, but also grinding and drying at the same time. The drying raw material can become the cement after the treatment of cement mill. The following step will use the Ball Mill For Gold: rotary kiln. As we all know, the cement after the cement mill is still raw, that is, the cement and water are separated from each other, and they cannot be mixed together. Here we will deal with raw cement through cement rotary kilnin order to get semi-finished cement.
Why do we call them semi-finished cement? Because the cement processed by cement mill can reach 100% of powder raw material. So we should screen the semi-finished cement by using rotary kiln, and re-process the raw materials which are not powder.
Thus, the cement production process is running to the end. Of course, the conveyor is indispensable in the whole production line. Whether in the process of raw material into the dryer or the dried product into the Fly Ash Grinding Mill, and even the product after milled in to the rotary kiln, all of the steps are integrated by the conveyor.

Rodyk draugams